Chinese
AUDSUN solar water heater , Heat Pump
 
   
  Home About Us Audsun News Basic Knowledge Products Toolbox Certification Irradiation Contact
   
 
     
 
 
 
Non-pressure System
Split Non-pressure System
Pressure System
Split Pressure System
Solar Manifold Collector
Optional Accessories
Solor Water Heater
【 Non-pressure System 】
 Pipeline Connection and Operation:
    With Gravity Feed Tank
    High Level Water Tank
    With Intelligent Controller
 
  V10-KGA Stainless Steel Series

This system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.

  
 
  V10-KPA Carbon Steel Painted Series

This system uses good quality of boron silicon all-glass evacuated tubes with selective coating Al-N/Al as collector, which the heat efficiency is very high.

  
 
  V8 Stainless Steel Series

This system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.

  
 
【 Split Non-pressure System 】
  TF Series

This system of solar water heater relies on a natural Principal-"Thermosiphon". In these systems the storage cylinder is separated from the collector and always located higher than the collectors.

  
 
【 Pressure System 】
  Working Principle

This is a pressure system that the storage cylinder and heat pipes are closed mechanically. Although there are some evacuated tubes broken the solar water heater can still work normally.

  
 
  TC-GD Stainless Steel Series

This system uses the fluid in the copper heat pipe as heat exchanger, which the heat startup is very fast. The all-glass evacuated solar collector tubular is heated by the sun.

  
 
  TC-KLAD Aluminum Alloy Series

This series uses good quality of boron silicon all-glass evacuated tubes with selective coating Al-N/Al as collector, which the heat efficiency is very high.

  
 
  TC-GDB Heat Exchanger Series

This is a pressure system that the storage cylinder and heat pipes are closed mechanically. Although there are some evacuated tubes broken the solar water heater can still work normally.

  
 
【 Split Pressure System 】
  Working Principle

The collector is separated from the storage cylinder, which provide flexibility to design the home with the collectors on the roof and the storage cylinder on the ground level.

  
 
 With One Heat Exchanger

    Using Heat Pipe Collector
    Using U-pipe Collector

 
 With Two Heat Exchangers

    Using Heat Pipe Collector
    Using U-pipe Collector

 
【 Solar Manifold Collector 】
 Non Pressure System Series

    Vertical Series
    Horizontal Series

 
 Pressurized Manifold Collector

    Heat Pipe Collector
    U-pipe Collectro

 
【 Optional Accessories 】
  Optional Accessories

This system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.

  
 
 
 
  Sitemap | Copyright | Friendlink | About Us | Contact |  
 
  © 2010 Foshan Shunde Aulun Electric Co,Ltd.
TEL:+86-757-25528371 E-mail:audsun-export@audsun.com